Kynar ozone injectors for the diffusion of ozone into water
For full technical specifications follow the link below
find out more

Fine bubble high performance air diffusers. Semi flexible diffuser construction 300cm long 32mm diameter. Maximum recommended air flowrate is 10 cubic metres of air per hour. Materials of construction are plastic with 316 stainless steel end fittings, aslo fitted with non return valve in diffuser. Diffuser contains its own internal fused silica bead ballast. End fittings are 1/2" acetyl plastic as standard.

The Dryden Air diffuser is the leading air diffuser used in UK aquaculture, treatment of leachate water on landfill sites, sewerage treatment and numerous other applications.
find out more

AFM (Advanced Filtration Media) grade 1 is the standard sized AFM media equivalent to 16 x 30 grade sand. M

Supplied in 25kg sacks, grade 1 particle size 0.5mm to 1.10mm. Media should be used on top of a layer of grade 2 AFM.

Price is per 25kg sack
(For bulk quantities and dealer prices please contact us directly at aqua@drydenaqua.com )
find out more

High performance, very robust galvanic oxygen probe for the measurment of dissolved oxygen in water, waste water and air. Completely sealed internals, so there is no risk of insulation failure, heavy duty Sub Sea cable, high mv out-put 6.5 mv to approx 1mg/l dissolved oxygen. Ideal probe for the Dryden Aqua, AquaTraul system or your own oxygen monitors such as multichannel or stand-alone PLC based systems.

The probe is supplied with 5 meters of cable (alternative lengths available), pack of 5 membranes and 50ml of electrolyte.
find out more

This is a standard general purpose low cost float switch. The cable is PVC. A pivot point weight can be added to the cable if required.

The float switch is rated for 240v ac 10 amp inductive load,

The float switch can switch small pumps on and off directly, however it possible it is always best to use a low control voltage which is used to activate a remote relay. The remote relay can then switch heavy loads such as pumps on or off.
find out more

Our reverse osmosis unit is fitted with 5 stage filtration system in which one of the stages is the reverse osmosis unit. The other four stages included a sediment filter and three carbon filters. The filters (excluding the reverse osmosis) should all be changed at the same time from 6 months to 12 months. If your water is hard and contains a high chlorine concentration, then it is recommended that it is changed every 6 months. The price of the product in this section, includes stage 1, 2, 3 & 5 elements. Stage 4 is the reverse osmosis membrane.
find out more

Replacement membrane for our reverse osmosis unit. Replacement is required every 24 to 36 months. If your water is hard ( over 129mg/l as calcium carbonate), or if there are high levels of chlorine in your water, then we recommend that the membrane is changed every two years.
find out more

Tear drop water level float switch, the float switch measures approximately 125mm in diameter. , total weight including cable 1.8kg
find out more

Weight for the standard float switch 10.1.37
find out more

Clock work belt feeders designed for feeding fish, but can be used for a variety of powder and pellet dosing applications. Four models are avaulable, 3 kg unit and 5 kg unit with either a 12 hour or 24 hour clockwork mechanism. The weight factor relates to the maximum weight that can be loaded on the belt.
find out more

Artificial seawater salt mix comprises of a blend of the 5 main constituents of seawater. Simply add 1 x 15kg bag of the product to make 500 litres of artifical seawater at 30ppt. Suitable for use in depuration units and crustacean holding systems.

Supplied in 15 kg bags, sufficient to make 500 litres of artificial seawater
find out more