In-line immersion heaters fabricated from a plastic polyamide body incorporating a titanium immersion heater. Suitable for use with seawater, aquaculture, swimming pools and corrosive environments. The unit is very simple to install, the fittings are 50 to 63mm PVC plain sockets. The electrical requirements are 230v ac, or on request 380 to 415v ac. The unit includes a thermostat with a range from 16 to 40 degrees centigrade that can be used to switch at + or - 1 deg C. There is no display of temperature, however if this is required Dryden aqua can provide a unit that can be added to the heater to give a temperature display and refine the control to 0.1 deg C. The In-line heater also includes a safety high temperature thermal cut-out and a low water flow switch.
more information
|
 |
In-line immersion heaters fabricated from a plastic polyamide body incorporating a titanium immersion heater. Suitable for use with seawater, aquaculture, swimming pools and corrosive environments. The unit is very simple to install, the fittings are 50 to 63mm PVC plain sockets. The electrical requirements are 230v ac, or on request 380 to 415v ac. The unit includes a thermostat with a range from 16 to 40 degrees centigrade that can be used to switch at + or - 1 deg C. There is no display of temperature, however if this is required Dryden aqua can provide a unit that can be added to the heater to give a temperature display and refine the control to 0.1 deg C. The In-line heater also includes a safety high temperature thermal cut-out and a low water flow switch.
more information
|
|
In-line immersion heaters fabricated from a plastic polyamide body incorporating a titanium immersion heater. Suitable for use with seawater, aquaculture, swimming pools and corrosive environments. The unit is very simple to install, the fittings are 50 to 63mm PVC plain sockets. The electrical requirements are 230v ac, or on request 380 to 415v ac. The unit includes a thermostat with a range from 16 to 40 degrees centigrade that can be used to switch at + or - 1 deg C. There is no display of temperature, however if this is required Dryden aqua can provide a unit that can be added to the heater to give a temperature display and refine the control to 0.1 deg C. The In-line heater also includes a safety high temperature thermal cut-out and a low water flow switch.
more information
|
|
In-line immersion heaters fabricated from a plastic polyamide body incorporating a titanium immersion heater. Suitable for use with seawater, aquaculture, swimming pools and corrosive environments. The unit is very simple to install, the fittings are 50 to 63mm PVC plain sockets. The electrical requirements are 230v ac, or on request 380 to 415v ac. The unit includes a thermostat with a range from 16 to 40 degrees centigrade that can be used to switch at + or - 1 deg C. There is no display of temperature, however if this is required Dryden aqua can provide a unit that can be added to the heater to give a temperature display and refine the control to 0.1 deg C. The In-line heater also includes a safety high temperature thermal cut-out and a low water flow switch.
more information
|
|
In-line immersion heaters fabricated from a plastic polyamide body incorporating a titanium immersion heater. Suitable for use with seawater, aquaculture, swimming pools and corrosive environments. The unit is very simple to install, the fittings are 50 to 63mm PVC plain sockets. The electrical requirements are 230v ac, or on request 380 to 415v ac. The unit includes a thermostat with a range from 16 to 40 degrees centigrade that can be used to switch at + or - 1 deg C. There is no display of temperature, however if this is required Dryden aqua can provide a unit that can be added to the heater to give a temperature display and refine the control to 0.1 deg C. The In-line heater also includes a safety high temperature thermal cut-out and a low water flow switch.
more information
|
|
In-line immersion heaters fabricated from a plastic polyamide body incorporating a titanium immersion heater. Suitable for use with seawater, aquaculture, swimming pools and corrosive environments. The unit is very simple to install, the fittings are 50 to 63mm PVC plain sockets. The electrical requirements are 230v ac, or on request 380 to 415v ac. The unit includes a thermostat with a range from 16 to 40 degrees centigrade that can be used to switch at + or - 1 deg C. There is no display of temperature, however if this is required Dryden aqua can provide a unit that can be added to the heater to give a temperature display and refine the control to 0.1 deg C. The In-line heater also includes a safety high temperature thermal cut-out and a low water flow switch.
more information
|
|
In-line immersion heaters fabricated from a plastic polyamide body incorporating a titanium immersion heater. Suitable for use with seawater, aquaculture, swimming pools and corrosive environments. The unit is very simple to install, the fittings are 50 to 63mm PVC plain sockets. The electrical requirements are 230v ac, or on request 380 to 415v ac. The unit includes a thermostat with a range from 16 to 40 degrees centigrade that can be used to switch at + or - 1 deg C. There is no display of temperature, however if this is required Dryden aqua can provide a unit that can be added to the heater to give a temperature display and refine the control to 0.1 deg C. The In-line heater also includes a safety high temperature thermal cut-out and a low water flow switch.
more information
|
|
