Fine bubble high performance air diffusers. Semi flexible diffuser construction 300cm long 32mm diameter. Maximum recommended air flowrate is 10 cubic metres of air per hour. Materials of construction are plastic with 316 stainless steel end fittings, aslo fitted with non return valve in diffuser. Diffuser contains its own internal fused silica bead ballast. End fittings are 1/2" acetyl plastic as standard.

The Dryden Air diffuser is the leading air diffuser used in UK aquaculture, treatment of leachate water on landfill sites, sewerage treatment and numerous other applications.
find out more

AFM grade 1 filtration media

AFM (Advanced Filtration Media) grade 1 is the standard sized AFM media equivalent to 16 x 30 grade sand. M

Supplied in 25kg sacks, grade 1 particle size 0.5mm to 1.10mm. Media should be used on top of a layer of grade 2 AFM.

Price is per 25kg sack
(For bulk quantities and dealer prices please contact us directly at aqua@drydenaqua.com )
find out more

Oxygen standard probe

High performance, very robust galvanic oxygen probe for the measurment of dissolved oxygen in water, waste water and air. Completely sealed internals, so there is no risk of insulation failure, heavy duty Sub Sea cable, high mv out-put 6.5 mv to approx 1mg/l dissolved oxygen. Ideal probe for the Dryden Aqua, AquaTraul system or your own oxygen monitors such as multichannel or stand-alone PLC based systems.

The probe is supplied with 5 meters of cable (alternative lengths available), pack of 5 membranes and 50ml of electrolyte.
find out more

Ozone detector card

Ozone detector card, each card can take five measurements of ozone and five cards are supplied with the pack. The card will measure ozone levels in air from 10ppb to 105ppb, this is the important range over which human health, respiratory and allergic reactions may be initiated. The card is intended as an indicator to help protect the young, elderly, people with respiratory or allergic reactions as well as the active sports person that does not want to be exposed to pollution while enjoying excercise in towns or on the top of a mountain.

The card is also important as a personnel monitor in industry and in the office, where laser printers and photocopiers and other machines all produce ozone. The legal limit in the UK for 8 hour exposure is presently set at 100ppb, any level above this concentration is un-acceptable and illegal in the work-place.
find out more

ET120 linear air blower

find out more

standard float LR03 switch 10m cable

This is a standard general purpose low cost float switch. The cable is PVC. A pivot point weight can be added to the cable if required.

The float switch is rated for 240v ac 10 amp inductive load,

The float switch can switch small pumps on and off directly, however it possible it is always best to use a low control voltage which is used to activate a remote relay. The remote relay can then switch heavy loads such as pumps on or off.
find out more

Aquaculture | Water Technology | Environmental Products.....delivered worldwide

ITT Marlow AV series Argonaut 1 speed

dry1 | Pumps,centrifugal, diaphragm & monitoring pH + ORP | Plastic self priming pumps 5-30 cubM/hr ITT | ITT Marlow AV series Argonaut 1 speed

AV50-2DN-S 1 phase pump 0.25kw

Ref: 2.1.11AV

Price: £286.87 / €372.93 (Excluding VAT at 17.5%)

ITT Marlow pump. This pump delivers 5 cubm/hr of water against a 10m head, shut off head is 12.5m and self priming head is 2.9m. This is a very reliable high performance unit suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.

Connections onto the pump 2" BSP male threaded, a pump union assembly is availble to cvert it to a 2" female pvc socket suitable for solven welding, see spares section.
more information

AV50-3DN-S 3 phase pump 0.25

Ref: 2.1.13AV

Price: £262.81 / €341.65 (Excluding VAT at 17.5%)

AV75-2DN-S 1 phase pump 0.37kw

Ref: 2.1.21AV

Price: £299.43 / €389.26 (Excluding VAT at 17.5%)

ITT Marlow pumpThis pump delivers 8.5 cubm/hr of water against a 10m head, shut off head is 15m and self priming head is 2.6m. This is a very reliable high performance unit suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.

Connections onto the pump 2" BSP male threaded, a pump union assembly is availble to cvert it to a 2" female pvc socket suitable for solven welding, see spares section.
more information

AV75-3DN-S 3 phase pump 0.37kw

Ref: 2.1.23AV

Price: £280.39 / €364.51 (Excluding VAT at 17.5%)

ITT Marlow pump. This pump delivers 8.5 cubm/hr of water against a 10m head, shut off head is 15m and self priming head is 2.6m. This is a very reliable high performance unit suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.

Connections onto the pump 2" BSP male threaded, a pump union assembly is availble to cvert it to a 2" female pvc socket suitable for solven welding, see spares section
more information

AV100-2DN-S 1 phase pump 0.55kw

Ref: 2.1.31AV

Price: £335.16 / €435.71 (Excluding VAT at 17.5%)

ITT Marlow pump. This pump delivers 12 cubm/hr of water against a 10m head, shut off head is 17m and self priming head is 3.0m. This is a very reliable high performance unit suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.

Connections onto the pump 2" BSP male threaded, a pump union assembly is availble to cvert it to a 2" female pvc socket suitable for solven welding, see spares section
more information

AV100-3DN-S 3 phase pump 0.55kw

Ref: 2.1.33AV

Price: £293.66 / €381.76 (Excluding VAT at 17.5%)

ITT Marlow pump. This pump range 12 cubm/hr of water against a 10m head, shut off head is 17m and self priming head is 3.0m. This is a very reliable high performance unit suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.

Connections onto the pump 2" BSP male threaded, a pump union assembly is availble to cvert it to a 2" female pvc socket suitable for solven welding, see spares section
more information

AV150-2DN-S 1 phase pump 0.75kw

Ref: 2.1.41AV

Price: £349.27 / €454.05 (Excluding VAT at 17.5%)

ITT Marlow pump. This pump delivers 15.5 cubm/hr of water against a 10m head, shut off head is 18m and self priming head is 2.7m. This is a very reliable high performance unit suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.

Connections onto the pump 2" BSP male threaded, a pump union assembly is availble to cvert it to a 2" female pvc socket suitable for solven welding, see spares section
more information

AV150-3DN-S 3 phase pump 0.75kw

Ref: 2.1.43AV

Price: £316.41 / €411.33 (Excluding VAT at 17.5%)

AV200-2DN-S 1 phase pump 1.12kw

Ref: 2.1.51AV

Price: £373.62 / €485.71 (Excluding VAT at 17.5%)

ITT Marlow pump. This pump delivers 18.5 cubm/hr of water against a 10m head, shut off head is 20m and self priming head is 3.5m. This is a very reliable high performance unit suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.

Connections onto the pump 2" BSP male threaded, a pump union assembly is availble to cvert it to a 2" female pvc socket suitable for solven welding, see spares section
more information

AV200-3DN-S 3 phase pump 1.12kw

Ref: 2.1.53AV

Price: £323.42 / €420.45 (Excluding VAT at 17.5%)

AV250-2DN-S 1 phase pump 1.5kw

Ref: 2.1.61AV

Price: £410.70 / €533.91 (Excluding VAT at 17.5%)

ITT Marlow pump. This pump delivers 25 cubm/hr of water against a 10m head, shut off head is 20m and self priming head is 4.2m. This is a very reliable high performance unit suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.

Connections onto the pump 2" BSP male threaded, a pump union assembly is availble to cvert it to a 2" female pvc socket suitable for solven welding, see spares section
more information

AV250-3DN-S 3 phase pump 1.5kw

Ref: 2.1.63AV

Price: £377.91 / €491.28 (Excluding VAT at 17.5%)

dry1 > Pumps,centrifugal, diaphragm & monitoring pH + ORP > Plastic self priming pumps 5-30 cubM/hr ITT > ITT Marlow AV series Argonaut 1 speed

Prices shown are all ex-works Edinburgh Scotland