dry1

HomeSite MapSearchCheckoutCatalogUpSend Mail

Product Sections

Main Pages

New Products

3/4" urethane reinforced hose

NoPhos concentrate 20 litre

NoPhos concentrate 20 litre

50% solution of NoPhos, Contact your local dealer, or Dryden Aqua for ordering information;

A flocculent to be used prior to sand or AFM filtration systems. The flocculent is focused on the removal of phosphate from water, wastewater and environmental systems such as zoos, aquatic displays and lakes. When used in conjunction with AFM filter media it acts as a surface catalyst and will accelerate the oxidation and cracking of organics as well as helping to disinfect the water.

2 x litres will remove approx 100g of phosphate as PO4--P.
find out more

3/8" urethane reinforced hose

Resonator transducer

Resonator transducer

Replacement stainless steel resonator transducer.
find out more

Resonator

Resonator

Resonator for connection onto ZPM unit, or for connection on to floating platform for algal control in ponds and lakes.
The Dryden Aqua Resonator is a 100 watt out -put ultrasonic resonator focused to product nano-bubble cavitation of the water. The equipment is tuned to a resonant frequency of water which amplifies the action of the high frequency shock waves. The equipment is about 10 times more powerful than most other systems on the market, and is the only one which has been specifically focused to hit a resonant frequency of water.
Resonator head is manufactured in 316 stainless steel and is fitted with a 5m cable. Power supply is 230 v ac 50/60 hz or 24 vdc.

find out more

Best Sellers

9 cubm/hr 3.00m long fine bubble air diffuser for waste water treatment

9 cubm/hr 3.00m long fine bubble air diffuser for waste water treatment

Fine bubble high performance air diffusers. Semi flexible diffuser construction 300cm long 32mm diameter. Maximum recommended air flowrate is 10 cubic metres of air per hour. Materials of construction are plastic with 316 stainless steel end fittings, aslo fitted with non return valve in diffuser. Diffuser contains its own internal fused silica bead ballast. End fittings are 1/2" acetyl plastic as standard.

The Dryden Air diffuser is the leading air diffuser used in UK aquaculture, treatment of leachate water on landfill sites, sewerage treatment and numerous other applications.


OEM and dealer enquires welcomed
find out more

AFM grade 1 filtration media

AFM grade 1 filtration media

AFM (Advanced Filtration Media) grade 1 is the standard sized AFM media equivalent to 16 x 30 grade sand. M

Supplied in 25kg sacks, grade 1 particle size 0.5mm to 1.10mm. Media should be used on top of a layer of grade 2 AFM.

Price is per 25kg sack

find out more

Oxygen standard probe

Oxygen standard probe

High performance, very robust galvanic oxygen probe for the measurment of dissolved oxygen in water, waste water and air. Completely sealed internals, so there is no risk of insulation failure, heavy duty Sub Sea cable, high mv out-put 8 mv to approx 1mg/l dissolved oxygen. Ideal probe for your own oxygen monitors such as multichannel or stand-alone PLC based systems.

The probe is supplied with 5 meters of cable (alternative lengths available), pack of 5 membranes and 50ml of electrolyte.

Please enquire about discounts for orders of 10 or more.
find out more

Aquaculture | Water Technology | Environmental Products.....delivered worldwide

immersion heaters with thermostats

dry1 | Temperature control Heating & Cooling systems | Water heaters | immersion heaters with thermostats

PTFE plastic heaters 0.5kw 1 phase

PTFE plastic heaters 0.5kw 1 phase

Ref: 4.8.60


Price: £238.20 / €285.84 (Excluding VAT at 17.5%)

PTFE plastic immersion heaters, fitted with feet, they can either sit on the bottom of the tank, or suspended by the wire. When suspended the feet keep the heating elemnt away from the tank wall.

The heaters are ideal for aquaculture and chemical heating applications because no metal components are in contact with the water. The heaters are also suitable for use in seawater or even strong brine solutions. The heaters are safer that metal heaters because they have a very low watt density. Standard cable length 2.0m of underwater cable plus 1.5m of electrical cable. Power supply 220 to 240 v ac , you require a thermostat controller and temperature probe.
more information

PTFE plastic heaters 1.0kw 1 phase

PTFE plastic heaters 1.0kw 1 phase

Ref: 4.8.61


Price: £303.20 / €363.84 (Excluding VAT at 17.5%)

PTFE plastic immersion heaters, fitted with feet, they can either sit on the bottom of the tank, or suspended by the wire. When suspended the feet keep the heating elemnt away from the tank wall.

The heaters are ideal for aquaculture and chemical heating applications because no metal components are in contact with the water. The heaters are also suitable for use in seawater or even strong brine solutions. The heaters are safer that metal heaters because they have a very low watt density. Standard cable length 2.0m of underwater cable plus 1.5m of electrical cable. Power supply 220 to 240 v ac , you require a thermostat controller and temperature probe.
more infomation

PTFE plastic heaters heaters 1.5 kw 1 phase

PTFE plastic heaters heaters 1.5 kw 1 phase

Ref: 4.8.62


Price: £340.56 / €408.67 (Excluding VAT at 17.5%)

PTFE plastic immersion heaters, fitted with feet, they can either sit on the bottom of the tank, or suspended by the wire. When suspended the feet keep the heating elemnt away from the tank wall.

The heaters are ideal for aquaculture and chemical heating applications because no metal components are in contact with the water. The heaters are also suitable for use in seawater or even strong brine solutions. The heaters are safer that metal heaters because they have a very low watt density. Standard cable length 2.0m of underwater cable plus 1.5m of electrical cable. Power supply 220 to 240 v ac , you require a thermostat controller and temperature probe.
more information

PTFE plastic heaters heaters 2kw 1 phase

PTFE plastic heaters heaters 2kw 1 phase

Ref: 4.8.63


Price: £342.12 / €410.54 (Excluding VAT at 17.5%)

PTFE plastic immersion heaters, fitted with feet, they can either sit on the bottom of the tank, or suspended by the wire. When suspended the feet keep the heating elemnt away from the tank wall.

The heaters are ideal for aquaculture and chemical heating applications because no metal components are in contact with the water. The heaters are also suitable for use in seawater or even strong brine solutions. The heaters are safer that metal heaters because they have a very low watt density. Standard cable length 2.0m of underwater cable plus 1.5m of electrical cable. Power supply 220 to 240 v ac , you require a thermostat controller and temperature probe.
more information

PTFE plastic heaters heaters 3.0 kw 1 phase

PTFE plastic heaters heaters 3.0 kw 1 phase

Ref: 4.8.64


Price: £356.17 / €427.40 (Excluding VAT at 17.5%)

PTFE plastic immersion heaters, fitted with feet, they can either sit on the bottom of the tank, or suspended by the wire. When suspended the feet keep the heating elemnt away from the tank wall.

The heaters are ideal for aquaculture and chemical heating applications because no metal components are in contact with the water. The heaters are also suitable for use in seawater or even strong brine solutions. The heaters are safer that metal heaters because they have a very low watt density. Standard cable length 2.0m of underwater cable plus 1.5m of electrical cable. Power supply 220 to 240 v ac , you require a thermostat controller and temperature probe.
more information

PTFE plastic heaters heaters 4.0 kw 1 phase

PTFE plastic heaters heaters 4.0 kw 1 phase

Ref: 4.8.65


Price: £412.36 / €494.83 (Excluding VAT at 17.5%)

PTFE plastic immersion heaters, fitted with feet, they can either sit on the bottom of the tank, or suspended by the wire. When suspended the feet keep the heating elemnt away from the tank wall.

The heaters are ideal for aquaculture and chemical heating applications because no metal components are in contact with the water. The heaters are also suitable for use in seawater or even strong brine solutions. The heaters are safer that metal heaters because they have a very low watt density. Standard cable length 2.0m of underwater cable plus 1.5m of electrical cable. Power supply 220 to 240 v ac , you require a thermostat controller and temperature probe.
more information

PTFE plastic heaters heaters 5.0 kw 1 phase

PTFE plastic heaters heaters 5.0 kw 1 phase

Ref: 4.8.66


Price: £557.95 / €669.54 (Excluding VAT at 17.5%)

PTFE plastic immersion heaters, fitted with feet, they can either sit on the bottom of the tank, or suspended by the wire. When suspended the feet keep the heating elemnt away from the tank wall.

The heaters are ideal for aquaculture and chemical heating applications because no metal components are in contact with the water. The heaters are also suitable for use in seawater or even strong brine solutions. The heaters are safer that metal heaters because they have a very low watt density. Standard cable length 2.0m of underwater cable plus 1.5m of electrical cable. Power supply 220 to 240 v ac , you require a thermostat controller and temperature probe.
more information

PTFE plastic heaters heaters 6kw 1 phase

PTFE plastic heaters heaters 6kw 1 phase

Ref: 4.8.67


Price: £692.00 / €830.40 (Excluding VAT at 17.5%)

PTFE plastic immersion heaters, fitted with feet, they can either sit on the bottom of the tank, or suspended by the wire. When suspended the feet keep the heating elemnt away from the tank wall.

The heaters are ideal for aquaculture and chemical heating applications because no metal components are in contact with the water. The heaters are also suitable for use in seawater or even strong brine solutions. The heaters are safer that metal heaters because they have a very low watt density. Standard cable length 2.0m of underwater cable plus 1.5m of electrical cable. Power supply 220 to 240 v ac , you require a thermostat controller and temperature probe.
more information

Thermostat controller withisolator

Thermostat controller withisolator

Ref: 4.8.19


Price: £720.77 / €864.92 (Excluding VAT at 17.5%)

Thermostat controllers for the immersion heaters and coolers, with built in isolator for switching up to 6kw. LED digital display with a 0.1 degree C resolution. The thermostats can be used for heating and cooling applications.

The immersion heater up to 6kw connects into the controller, the tmperature probe also connects directly into the controller. The controller is then connected to your power supply. 230v ac 50 hz

more information

Temperature probe

Temperature probe

Ref: 4.8.24


Price: £286.33 / €343.60 (Excluding VAT at 17.5%)

Plastic temperature probe, type pt100 for use with immersion heaters. Cable length is 3.5 meters
more information

Standard electrical cable for heaters

Standard electrical cable for heaters

Ref: 4.8.69


Price: £4.90 / €5.88 (Excluding VAT at 17.5%)

Additional standard elecrical cable for the heaters
more information

dry1 > Temperature control Heating & Cooling systems > Water heaters > immersion heaters with thermostats

Prices shown are all ex-works Edinburgh Scotland

© 2006 Dryden Aqua Ltd  Send Mail | Privacy Policy | Info