|
|
|
Web sites] | Home | AFM | Ozone | Reverse Osmosis | Swimming Pools | |
||
Inline Immersion heaters
| In-line immersion heaters fabricated from a plastic polyamide body
incorporating a titanium immersion heater. Suitable for use with seawater, aquaculture,
swimming pools and corrosive environments. The unit is very simple to install, the fittings are 50 to 63mm PVC plain sockets. The electrical requirements are 230v ac, or on request 380 to 415v ac The unit includes a thermostat with a range from 16 to 40 degrees centigrade that can be used to switch at + or - 1 deg C. There is no display of temperature on the model shown on this web page, but models with temp display can be viewed in our on-line web store. Technical details and features are given below |
  |
Technical data
| 3kw | 6kw | 9kw | 12kw | |
| current consumption | ||||
| 380-415v | 5 | 10 | 14 | 20 |
| 230v | 14 | 28 | 41 | |
| Maximum pressure rating | 3 bar | |||
| Flow rate min | 5 cubm/hr | |||
| Flowrate max | 30 cubm/hr | |||
| Hydraulic connection | PVC unions 63mm + reduction to 50mm | |||
| height | 205mm | |||
| length | 452mm | 452mm | 552mm | 552mm |
| depth | 81mm | |||
| weight | 3kg | |||
Features
- Chemical and electrolyte corrosion proof injected polyamide body
- Heating element in Titanium
- High sensitivity (+/- 0.5 deg C) control thermostat 16-40 deg C
- Positive safety high limit switch
- Heating elemnt sealed by EPDM seals
- Hypalon coated electrical connections
- Power contactor
- Flow switch
- on/off switch
