Conductivity for pure
water, low and high conductivity
water tester home | buy or
view price | manual
- IP67 Waterproof and Dustproof - ideal for rugged wet
applications
- Lightweight and it Floats for easy retrieval
when dropped into water
- Ultra-Low Resolution (up to 0.1 µS/cm) for
discerning measurement requirements
- User-Replaceable Sensor lets you reuse meter body
many times
- Push-Button Calibration for quick, easy calibration
with no worry of damaging trimmers found in conventional testers
- Direct Full-Scale Readout eliminates guesswork
- Automatic Temperature Compensation (ATC)
- Temperature Readout (ECScan Low+/High+/Pure+) at the
touch of buttons
- Auto-Power Off conserves battery power and saves you
money
- Hold Function freezes reading momentarily for easy
viewing and recording
- Self-Diagnostic with message codes for easy
troubleshooting purposes
- Cup-Type Sensors (ECScan Low+/High+/Pure+) provides
for small sample-volume measurements or direct immersion into test sample
- Dip-Type Sensors (ECScan Low/High) allows direct
immersion into sample
|
 |
These microprocessor-based ECScan
High/Low/High+/Low+/Pure+ are for use in aquariums, swimming pools, drinking water, water
and waste-water treatment, boiler blow down, electroplating rinse tanks, hydroponics,
printing industry, aquaculture and fish-farms, etc.
Specifications
of ECScan High/Low/High+/Low+/Pure+ Testers
Product Code |
8.0.49
HIGH |
8.0.48
LOW |
8.0.51
PURE |
| Conductivity Range |
0 to 19.99
mS/cm |
0 to 1999
µS/cm |
0 to 199.9
µS/cm |
| Resolution |
0.01 mS/cm |
1 µS/cm |
0.1 µS/cm |
| Accuracy |
±1%
Full Scale |
| Temperature Display |
-5.0
to 55.0 °C (±0.5 °C accuracy) |
| Temperature Coefficient |
2%
per °C |
| Operating Temperature |
0
to 50 °C |
| Special Functions |
Self-diagnostic;
Hold; Auto-Power Off after 8.5 minutes |
| Power Requirements |
4
x 1.5V button cell batteries; >100 hours |
