NQA
European Commission project  for your
Life & the Environment click here

Water Quality Monitoring

Instrumentation

factory.jpg (3825 bytes)

| Homepage | Contact us  | About us |  Shop |

| Index for instruments | Oxygen probes | Wireless Oxygen monitor | Portable Oxygen meter | bacterial dip slides | Total Gas | Float switch |  

water tester home | buy or view price | manual

TDScan High/Low/High+/Low+/Pure+ Waterproof TDS Testers

  • IP67 Waterproof and Dustproof - ideal for rugged wet applications
  • Lightweight and it Floats for easy retrieval when dropped into water
  • Ultra-Low Resolution (up to 0.1 ppm) for discerning measurement requirements
  • Microprocessor-based with advanced user-friendly functions incorporated
  • User-Replaceable Sensor lets you reuse meter body many times
  • Push-Button Calibration for quick, easy calibration with no worry of damaging trimmers found in conventional testers
  • Direct Full-Scale Readout eliminates guesswork
  • Automatic Temperature Compensation (ATC)
  • Temperature Readout (TDScan Low+/High+/Pure+) at the touch of buttons
  • Auto-Power Off conserves battery power and saves you money
  • Hold Function freezes reading momentarily for easy viewing and recording
  • Self-Diagnostic with message codes for easy troubleshooting purposes
  • Cup-Type Sensors (TDScan Low+/High+/Pure+) provides for small sample-volume measurements or direct immersion into test sample 
  • Dip-Type Sensors (TDScan Low/High) allows direct immersion into sample
tdsscanpls.gif (11239 bytes)

The microprocessor-based TDScan High/Low/High+/Low+/Pure+ are for use in aquariums, swimming pools, drinking water, water and waste-water treatment, boiler blow down, electroplating rinse tanks, hydroponics, printing industry, aquaculture and fish-farms. etc.

Specifications of TDScan High/Low/High+/Low+/Pure+  Testers

Product Code

8.0.47
HIGHPLS

8.0.46
LOWPLS

8.0.50
PURE

TDS Range 0 to 10.00 ppt 0 to 1999 ppm 0 to 199.9 ppm
Resolution 0.01 ppt 1 ppm 0.1 ppm
Accuracy �1% Full Scale
Temperature Display -5.0 to 55.0 �C (�0.5 �C accuracy)
Temperature  Coefficient 2% per �C
Operating Temperature 0 to 50 �C
Special Functions Self-diagnostic; Hold;  Auto-Power Off after 8.5 minutes
Power Requirements 4 x 1.4V button cell batteries; >100 hours