European Commission project  for your
Life & the Environment click here

Oxygen Monitors & water quality monitoring Instrumentation

Environmental & sustainable water treatment to save the planet

factory.jpg (3825 bytes)

cool hit counter

| Contact us  | About us Search |  Shop ||

Web  sites               | DrydenAqua AFM  |  Ozone | Membrane filtration | Swimming Pools
Instrumentation       | Index for instruments | Oxygen probes | AquaTraul O2 monitors |  Refractometers | bacterial dip slides | Total Gas |
Water test kits         | index for water test kits | Swimming pools | aquaculture & aquaria | drinking water | water treatment |

Public Swimming  Pool Lab

 

 
Code Buy or view price    
8.13.1 Buy or view price Swimming Pool

Complete public swimming pool lab kit

   

Tests included in the Swim Kit

Range
8.10.10 click here Alkalinity (Total) in water (reagent set) 100 - 4000 mg/L
8.10.15 click here Calcium Hardness in water (reagent set) 100 – 4000 mg/l CaCO3
8.10.22 click here Chlorine in water (Total & Free) reagent set 0.1 - 50 mg/l
8.10.32   Chlorine dioxide (module) 0 - 2 mg/l
8.10.40   Phosphate, LR (module) 0 - 2.5 mg/l
       
       
   

Optional extras, not included in Lab Kit

 
8.2.2 buy or view price pH

Waterproof pocket pH meter  click here for technical information   

General purpose high quality low cost pocket pH meter water proof to IP67 standard. Range 1 to 14 pH units, resolution 0.1pH units, with automatic temperature compensation, and automatic buffer recognition.

pH waterproof testers
8.2.120 buy or view price ORP (Redox)

Waterproof pocket orp meter  orp hand held tester  

 

orp waterproof tester
8.0.47 buy or view price TDS (Total Dissolved Solids)

Waterproof pocket TDS meter click here for technical information  0 to 10,000 ppm

 

TDS 0 to 2 g/l
8.8.8 buy or view price Bacterial Dip Slides

Bacterial dip slides,  you can use these slides to determine the concentration of bacteria in the water, click here for information

Aerobic bacteria water test kit, TTC media in un-branded box. This bacterial dip slide will give a measure of the bacterial concentration in the water from approximately 1000 bacteria per ml to 1,000,000 per ml. To use the test, you remove the slide from the tube, dip it in the water and replace back in the tube. The slide is then incubated at room temperature for 2 days, the bacterial colonies will appear as red spots. Compare the red spots against the chart provided to find the bacteria level.

Price per pack of 10 dip slides.

4.jpg (5209325 bytes)