|
Environmental &
sustainable water treatment to save the planet
|
| Contact us | About us | Search | Shop || |
| | Home | AFM | Ozone | Membrane filtration | Swimming Pools | | ||
Ozone contactor
contactor home | buy or view price
| Ozone contacts for freshwater and marine applications. The equipment is manufactured from polyester with
PVC internals for the units 600mm diam to 800mm diam. From 1050 to 2350mm diam, the contactors are manufactured as polyester bobbin wound units. The contactors act as reaction vessels for ozone, to be used after venturi injectors in a pressurized water feed line. Both size groups have a 3/4" sigh glass, water pure ad air purge for connection to an automatic bleed assembly Working pressure 2.5 bar, test pressure 3.7 bar. Access port is 300mm x 400mm for the 600 and 800mm nits, port is 400mm dam for the larger nits
|
 |
||||||||||||||||||||||||||||||||||||||||||||||||||
| Water Flows The water flow rate through the contactor is site and water dependent, however as a general rule, the longer the residence time the better. The minimum residence time should be 2 minutes, but 5 minutes would be more reasonable for applications above 25 deg C, 7 minutes between 15 and 25 deg C and 10 minutes, below 15 deg C. |
|||||||||||||||||||||||||||||||||||||||||||||||||||
