New Page 2

Acts like a thermostat to control ozone generators and alarms based on an adjustable ozone concentration set-point. Simple and inexpensive.

Specifications:

Range and Accuracy: .03-.1 ppm of ozone. Approximately 20% Accuracy.
Response time: Within 10s of seconds of the ozone reaching the sensor.
Measurement Principle: Advanced design HMOS (heated metal oxide semiconductor) sensor.
Size: 76 × 64 × 42 mm (3 × 2.5 × 1.625 in).
Weight: 5oz. (140 grams)
Power Requirements: 12-24 VDC, 300 mA. AC adapters available.
Output control: SPDT non-latching relay. Contacts rated at 5 amps, 250 VAC, or 1/8 HP inductive load.
Connections: 5 Circuit totally enclosed terminal block for relay output and DC input. Also, 2.5 mm DC power jack for AC adapter.
Indicators: Green LED: instrument on. Red LED: set-point exceeded and relay activated.
Case: Flame-resistant ABS.
Not recommended for outdoor use or in presence of output gases.

European Commission projects for yourLife & the Environment. Be informed, Join our Information Service	www.ozone.co.uk	\| on-line shop \| \|contact us \| search \|
Web Sites ] \| Ozone \| Dryden Aqua \| AFM \| Reverse Osmosis water filters \|

OS-1X Ozone Switch™	\| prices \| manual \|